feigned

[QUOTE=jayant]win2k is supposed to have very poor h/w support (specially server, adv. server). 2k home/pro have better h/w support than other 2, but still not good enough. either 98/me or xp[/QUOTE] Uh, no. 2k Pro/Server/Adv. Server all have the same Plug and Play support, the same initial driver base, but …

It would have to work with LDAP, directly. Aside from that, you're wanting to pull information directly out of the "hardware" script to put into the "OU" script? Sounds like a jumble. How many machines are you talking about? 10, 100, 500, a few thousand?

You can run a repair install. Boot up with your 2k cd, select repair, let it do it's thing, come back if that doesn't help.

Also, there is a twist of 8 or 10 wires on the end that should plug into the drive. Well, that's with a ribbon cable...rounded are a bit harder to diagnose, but it's either/or.

[QUOTE=I_NEED_HELP]here is the info about the motherboard [url="http://www.e4all.info/motherboards/anaheim2.htm"]http://www.e4all.info/motherboards/anaheim2.htm[/url][/QUOTE] Click on the "Jumpers" link on that page and you'll see this: "[font=Arial][size=2]No jumper does set the functionality of the GMCH graphics controller. PCI Graphics device operates automatically if PCI Graphics card is inserted."[/size][/font] [font=Arial]Why it's not going to the PCI card …

Usually programs that start up in the system tray give the option keep that from happening. Check the preferences for that program.

[QUOTE=vyruzxxx21]so what should i do about this drive geometry setting to my maxtor? After placing my maxtor hard drive into my pc1, after the memory counting process, it hangs. Then after 30 sec's then the pc will see no hard drive installed. is this problem is all about the interface …

[QUOTE=jaytelcom]I recently bought the xtasy 9200 se 128mb PCI card. I want to use the dual monitor capability but I can't figure out how to clone the primary screen. Can anyone help?[/QUOTE] Have you installed the latest Catalyst drivers?

[QUOTE=helen]We have tried all ways, we have looked at the permissions. We are having difficulty with the replication of folders also.[/QUOTE] It's all in the permissions. Can't export/import the stores?

[QUOTE=whipaway]You will need a scsi interface card for your mb. Adaptec and others have such an interface card that will suit your needs.[/QUOTE] A Raptor by definition is an SATA drive, not SCSI. I'll give you this though, it is essentially a SCSI disk with a different interface.

I'd reset the CMOS. Unplug system, short CMOS jumper, connect back, plug in power. I don't think you can change the multiplier on a Pentium chip. Front side bus I know you can.

[QUOTE=|The|Snowman]Ok, your title states: "Hiding IP addy for WAN traffic?" To my knowledge, your not going to be able to do this, the best you can do is encrpyt the data no? Whether or not your ip is static or dynamic, there isn't going to be a way to hide …

[QUOTE=mrw00]I have 1mbit cable connection which can reach 150k without problems when ever i download from the internet through explorere or DAP which is great, BUT when i use programs like Kazaa, Bit Torrent, Overnet it can only download at 20-30k no matter what, i noe its not my line …

[QUOTE=JGS1422]how do you uninstall windows server 2003? :lol:[/QUOTE] You format. That's it, all you have to do.

I own an Athlon 1700+ (that's 1.47GHz) overclocked to 2.2GHz seated in an Epox 8RDA+. The hottest thing going currently however is an Athlon Barton core 2500+ paired with any nForce2 based board. But if you're stuck on Intel, an Abit IS7 (I think that's the model) is the way …

[QUOTE=cconti51]Help. I need to free up my system resources to increase my computer's speed. I use a DSL connection but the system "gurgles" forever. Performance rates are at 64% 80%- Any susgestions? I'm not super computer savy.[/QUOTE]Look at your taskbar. On the bottom right are some of your running tasks. …

Firstly, can you post the make and model of the monitor? Are the "sliding" pins on the RGB connectors, or the 15-pin one? If they're on the RGB connectors (aka barrel connectors), you'll either 3, 4, or 5 of them. If you have five, those correspond to Red, Green, Blue, …

[QUOTE=f575gtc]i already picked out a mother board that supports p4 and celeron 1.7Ghz to 2.4GHz and all my hard drives and such plug right in. One question will the pci slots and agp slot line up with my current tower? i have a ATX tower adn the MB is ATX. …

[QUOTE=himerus]ugh... they are on a single partition. :([/QUOTE] Then you get to delete the directory and modify the boot.ini file. Otherwise, backup and reinstall.

[QUOTE=msEinstien]How can I determine if a computer is a single or dual processor without opening it? Thanks,[/QUOTE]If it's a Hyper Threading P4, you're going to have one physical processor, but the system will see two logical ones. If you're running 2k or XP, press control, alt, and delete at the …

[QUOTE=f575gtc]Great... I just found out my computer doesn't have AGP slots does the ATI Radeon 9600 have a PCI card version? And I was looking at cards and saw that different companies have the same card like 3d connect has a Radeon 9600 128MB is the card gonna have the …

[QUOTE=I_Know_Nothing]I'm eventually going to but an AMD Athlon XP chip, somewhere around the 2600 model, but some models are made with both core types. Do I even need to worry about it? If the core type is not listed in the detailed description of the CPU, then how do I …

Sure...Its only fact you cant deny When you instigate stupid bullshit like that? You could have been quite a bit more civil with the statement about "Computer Foresics." Just about every post I come across made by you has been in pure troll fashion. If you have nothing positive to …

[QUOTE=vassili_zaitsev] is this the nature of HT? does it only allow one application thread a certain amount of cycles?[/QUOTE] Yes, that's the nature of HT. You get a "second" processor for "free," though it's logical and not physical which you all ready understand quite clearly. The reason why you see …

[QUOTE=philpotrebel]what would be the best socket A motherboard to get. I need a good gaming motherboard[/QUOTE] Anything with an nForce2 chipset. Epox 8RDA3+ would be my choice. I have an 8RDA+, which is just an "older" version of the 3+. It's a great board. I've heard the DFI LanParty is …

[QUOTE=need_help]I THREW AWAY RUNDLL AN RUNDLL 32 HOW CAN I GET IT BACK PLEASE RESPOND[/QUOTE] Windows..... ? 2k XP 98 ?

Heh. Lovely. :)

[QUOTE=Soaker]I mean, we paid for it a year or so ago. Hope this is clear and enough information.[/QUOTE]I know this doesn't help to solve your problem, but in all reality what you're doing is illegal according to the license agreement that you clicked "Accept" during the installation on your wife's …

640x480 16bpp is usually an indication that you have to install drivers for your video device, not a BIOS setting.

What exactly happens? You click on a link to a .zip file and it goes to a "Page cannot be displayed page" or it pops up a window that says "Internet Explorer cannot download the file" ? If you get the first, then that file doesn't exist. If you get …

[img]http://feign.no-ip.org:1987/images/ttf.gif[/img] # of posts - 1337. Break out your dictionaries for this one kids!

[QUOTE=bluedos82]In college all we did was we networked servers together... I am about to network 3-4 computers in my home and I was just wondering if there was any way that I can connect them straight through a hub, without a server. I'm sure that some people are laughing at …

[QUOTE=caperjack]put in you winxp disk ,reboot and run the repair !![/QUOTE] Seconded.

What java component are you using? java.sun.com has the best. Download 1.4.2.

[QUOTE=spikes]Hi All looking for a few words of wisdom. just replanning my networkand thinking of what kit to get. i'm looking to get 1x mass store/fileserver (posabily for streamimng media) 1x webserver 1x terminal server just wondered if any of you have any advice on the spec's for these types …

[QUOTE=suzu]DMA? Ah, I'm using XP Pro.[/QUOTE] It's under Device Manager. Look for the "IDE\ATAPI Controllers," and double click the "Primary IDE" selection. You should see a "Settings" tab on the top of the window that pops up. Click it. Make sure both channels are set to "DMA Enabled." Do the …

[QUOTE=)BIG"B"Affleck][b]He means whith a can of air duster seriously[/b] [b]Might I add this will void any warranty on the power supply.[/b][/QUOTE] I remember yanking the AT connector and the ATX 2.03 12v 4-pin connecter out of my Antec. Useless connections. Yes, I voided the hell out of that thing a …

[QUOTE=)BIG"B"Affleck]Get all INTERFERENCE away from it [thread=1280] CLIck HERE[/thread][/QUOTE]Exactly. Even electric runs for an outlet can cause a monitor to go wonky. Or could just be a funky monitor. No way to really tell, unless you figure out the problem that is. :mrgreen:

Download Adaware. [url="http://www.lavasoft.de"]www.lavasoft.de[/url]

CR2032 3.0v

Can you screenshot that context menu for us so we can see it?

[QUOTE=bobroberts]I just changed my power supply and when I boot it says till i use 40 conductors wire and not 80 cond. w. it will be switching from d2 to ultra33 mode what does it mean and what should I do[/QUOTE] Some BIOS'es can detect what kind of wire you're …

Yeah. Shouldn't be any beeps or anything notable. Just silence for the most part. Some boards will beep at you though.

Yeah, I'd say drivers. That card was a spectacular piece of hardware a few years ago, but it's definitely not Dx9 compatible, let along 8, maybe even 7. That was going to be my guess. heh

[QUOTE=f575gtc]I have 256MB on a 2.20GHz Intel Celeron. The 256MB is (PC2100) I was planing on installing a 512MB stick,but I need to know can I install (PC3200) memory when the other 256MB is (PC2100)? and what is overcycling and will it happen to me in doing this?[/QUOTE] In all …

There won't be problems with the physical installation of the hard drive. Master and Slave, or Cable Select both drives with the jumpers on the back. Should have instructions for that on the label of the drive. From there, you'll have to reset the permissions/owner for the Documents and Settings …

You'll need the SATA drivers for your chipset for the OS to recognize that the drive is even there. This will depend on your motherboard, or less likely, an add-on PCI card.

[QUOTE=10pin]That's quite a long run. UTP cable runs should be limited to 100m and looks like you are close to that limit. Do you know why you need the switch in the middle? Will be be connecting to other equipment or is it just to join up the two segments? …

[QUOTE=)BIG"B"Affleck][b]That motherboard is not going to cut it considering its 2X older than counter strike its self.[/b] A: The system requirements for counter-strike was written three years ago, during that time many changes and additions to counter-strike which have made the requirements much higher. I recommend at least a pentium …

There are tons of plugins available for Motherboard Monitor. mbm.livewiredev.com is the place to obtain that. It works with vitually any chipset available. It's an awesome little utility. There are also quite a few aftermarket coolers available for the FX cards. Check [url="http://www.newegg.com"]www.newegg.com[/url] for those.