No one has voted on any posts yet. Votes from other community members are used to determine a member's reputation amongst their peers.
15 Posted Topics
There is a command to show full details for the machine which im guessing is the one you have already found, but there are several switches that can be used with it to narrow down the information displayed. Hopefully you can find what your looking for using the commands below. …
I have just received my TomTom Go 920T back from TT support as it had a few issues (this is the second time I have got it back from being supposedly repaired, and it has come back from they're workshop with exactly the same Trojan reported allover the net! So …
Hi garbanzo, You say you have swapped around your memory. Have you tried a known working stick of memory in your machine, or tried the sticks you have in another working machine just to rule that out for definite? If you are getting a reaction when both sticks of ram …
Hello fsalvador, If you have not already I would suggest checking your Time Synch. Server settings in System Pref's > Date & Time > Date & Time tab. Try disabling the 'set time & date automatically' checkbox if it is indeed selected then manually set the correct time to see …
Hi Richard, By the sound of it you have a hardware issue with your logic board/on-board video. Have you noticed the machine slowing or an increase in screen artifacting as it becomes warmer or do the problems occur straight from a cold boot? Software would not usually be the cause …
Hello everyone. This is quite possibly not the place for this but it is more to do with SQL than the other things included so I apologise if I am wrong. I am looking for some help on a task I have been set. When I say help, what I …
Hi Frag, What actually happens when you connect the camera? Do you get the USB connection noise? Do any of the information bubbles appear down the bottom with an error? In Device Manager, is the camera detected as a functioning device or is there a drive displayed in My Computer …
What kind of Mac is it your camera is connected to? Is it an internal camera (built into the screen) or is it an external (USB) camera? What make and model of camera is it? Have you checked that it is compatible with the Mac if it is third party? …
Just a quick one..... Have you tried the camera on another computer? Is it recognised on any other machine, same goes for the card in a card reader, is it readable from another PC or MAC?
If it's not got a driver CD with the USB drivers specifically for Standard 98 then you will more than likely have issues. One of the great things about 98SE was that USB Support was improved to no end. If it's not got a driver CD, have a flick around …
Go to your Device Manager by right clicking on My Computer and selecting Properties from the bottom of the list, then pressing the Hardware tab. Look down the list for any Yellow exclamation marks showing hardware that is not installed. If there are, you need to install the drivers for …
In the past I have found this problem to be linked to graphics cards, more specifically in my case, AGP cards. If your machine has an AGP or PCI graphics card in it, and also has on-board graphics, try taking the card out and running from on-board graphics to see …
Hello everyone. This is my first post here and most definitely not my last as I will be requiring your expert knowledge on lots of topics no doubt. I have a series of questions regarding VB and a project I have be set to work on. The first part of …
This problem obviously would have been resolved by now but if someone else comes across this thread wanting some kind of solution........ Start up the mac with the option key held down so you can see your bootable partition with your information hopefully on it. Boot from that partition by …
Hi NPP, I am based in CM21, a little distance for you unfortunately but I will try to help as much as I can. The only solution to your problem will be to use a Power PC OS X Install CD for your version of OS10. Holding the option key …
The End.