No one has voted on any posts yet. Votes from other community members are used to determine a member's reputation amongst their peers.
16 Posted Topics
The use of third party gateways can work "I use one for a few of my sites" and if a person does not have to put in any personal info on your site like their credit card info, then no you do not need an SSL for your site. One …
ok This is not a timely response but... First I have a few questions I need to ask so i can provide you the best answer. 1. Your asking about the processor. this means your also upgrading the main board and mem. What board are you looking at and how …
Your RIP and SAP are not set correctly. To be honest I would migrate to a pure IP network and get off the the IPX but that is your call. To fix the issue load the IPXCON.nlm or tcpcon.nlm and change the RIP and SAP from B65BBF9C to 00000001 or …
For a quick test unplug everything from the main board "all drives" and remove all but the minimum amount of ram then boot the system. This will tell you if it is the board or if something is holding out the video. Please let me know if you see anything …
I use the following on my site and works great [code]<div align="center"><a href="#sizing">Sizing</a></div>[/code] This links to [code]<div align="center"><strong><a name="sizing" id="sizing"></a>Sizing</strong></div>[/code] So you need to change yours to [code]<p><a href="#enlace1">Blogs de Interés</a><span class="text"> | </span> </p>[/code] Linking to [code]<a name="enlace1"></a> <h3><b>Blogs de Interés</b></h3>[/code] and it will work
Although I have never done it myself I have seen one set up using a system like the one shown [URL="http://www.sonicwall.com/us/products/TZ_210.html"]here[/URL]. You may want to contact them and see if it will do everything what you want. [QUOTE=slankybiola;1126519]i want to learn how to configure my system to set up time …
a blinking cursor in the upper left corner is most likely a master boot record issue. if you just Ghosted your drive do the steps by Steco. If it just started this run fixmbr from the recovery console. you may have to change the boot order in the Bios to …
Okay I'm confused with what your saying. Your router is saying wrong password. So you could login you pushed the reset button to reset it to factory? After you reset it to factory the name of the network changed. You want to know why it changed? Or You pressed the …
I have seen this issue with Amer access points in an office building. The issue there was they had so many set to every channel that they where stepping on each other. What we had to do is after we got a computer connected we had to unplug and replug …
Do you get a logo screen and can you get into the Bios? Screen stays blank. Try this: Remove the hard drive and cd if possible. Also remove all but 1 stick of ram if you can. Basically get the system down to where you're only booting the main board …
I know this is not a quick reply but maybe it will still help. 2. He says you should use up to a hundred keywords/1000 characters in the keyword metatag (and I noticed that SEOMoz doesn't even use metatags). [From Rebecca: we don't use the meta keyword tag.] No: keep …
1. Will it detect it if you put it as a slave on the secondary IDE port with the cd as master? 2. Have you tried reading here? [url]http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=168595&Hilite=[/url] 3. When you had the drive install as an external drive, did you scan it for virus / rootkits? Sorry for …
looking at the ipconfig your connected via a hard wired lan. As you know you are not getting an ip assigned to you by the DHCP server. Are you plugged into a router modem or what? I'm assuming that you have tried to release and renew the ip with no …
1. Do you have a light on the mother board? 2. To test the switch a continuity test is best, but if you want a cheap and dirty test you can do the following: Look in your user manual and find the 2 pins on the board that are for …
Have you tried mcmelectronics.com ? They are a paper company of Newark. There site only shows a limited selection so if you need to call them and ask. Also anything you see on Newark.com can be bought through MCM and vice versa [QUOTE=Talguy;1115687]Not really sure if this is the right …
I would get a linux boot cd and boot from it. if it works the the issue could be windows 7 or the hard drive. I would then download a hard drive fit test and test the drive. if all goes wrong get a "33in USB 2.0 to IDE or …
The End.