No one has voted on any posts yet. Votes from other community members are used to determine a member's reputation amongst their peers.
7 Posted Topics
OMG, i finally fixed it with the tin foil fix between the pins, it took 2 hours and alot of swearing to do it but i finally did it I was working with a toshiba satellite 1800-s254 with a sd-c2502, i took the drive out (2 screws on the inside …
Hi everybody, just gotta quick question, On my usb 2.0 pcmcia card (2 plug), there is a power adapter hole in between the usb slots, what is this used for? is it even necessary ? I thought pcmcia slots were self powering ? Also, i have a 4x burner (...i …
hey, right click the drive, go to the RECORDING tab, and click "Enable CD recording on this drive"... or something to that effect, my PD NEC DVD RW did the same thing and i couldnt explain it, so i went back to basics, and what'ya know, it worked, hope this …
what happened was that it must have been priorly formatted in the wrong format (ala FAT File sys being formatted to FAT32) or vice versa, send it to the manu of the stick and they MUST replace it free of charge. They always do, even if you dont have a …
yes, this stick was improperly formatted (it may be a fat system and you or someone had to have formatted it under fat32, or vice versa) Ive seen this happen a million and 2 times, send it back to the manu, and they'll replace it free of charge
second hand HDD smoking......... great next they'll have a bill to were you cant smoke near your comp ;p lol
Your drive is set to PIO mode, get into your device manager, go to IDE, select secondary, switch to DMA if available, then UNINSTALL and REBOOT your sys, should reinstall and be in DMA mode Also, since its a toshiba, bios might be messing with ya, go into bios and …
The End.