ipradip

you don't have to worry about that. It again starts when heat increased. So no need to replace CPU fan it's a default properties of laptop CPU cooler.

You can use switch or direct cable to connect different PC but one thing you have to give same range of IP address in both PC (eg: PC1:192.168.0.1 & PC2:192.168.0.2). One thing while you use direct cable you have to use crossover cable.

Please find the detail configuration below: **Router Conf** Router#sh run Building configuration... Current configuration : 987 bytes ! version 12.4 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption ! hostname Router ! ! ! ! ip dhcp excluded-address 172.17.10.2 172.17.10.10 ip dhcp excluded-address …

it depends upon the design of laptop while manufacture so there is not any exact reason that touch pad have should be in center but if your laptop ls larger in size i.e more that 15" and the keyboard have number pad then the touch pad are in left side …

first of all i want to know is your windows host is in 192.168.1.0 network ? if so then as you already forwarded ip now what you have to do is set the gateway and dns ip for windows host as follows: gateway : your lan ip of linux host …

yes you may say hybrid topology but i prefer it as mesh topology but it doesn't make any difference that what topology you use while network but main thing is that is every computer get access for internet or only few and main thing is security so always concern in …

may be your router is problem if you can verify it then it's easy to find out the actual problem another thing is that if you are confidence that your router is not a problem then check the cable connection of router or may be your clamping problem in cable …

contact your system administrator for proxy server ip address and port number or you may contact who created that proxy server.

are you using wireless? then it's not in the reachable position or if you are using lan then may be your cable is not working well so check the all connection and confirm that

if you want to add domain then go to create account and create it as per your requirement and go to cpanel of that account and add subdomain as per your requirement. hope this is useful for you

if you are the user of Linux then it is very easy to setup in a single network card but if you are user of windows then i prefer you to use router. routers are very useful to connect different network.

it is strongly recommended that you always use security in your wireless router so first set wep key in your router then connect it through password if again same problem is repeated then try to upgrade your firmware. but it is strongly recommended that you should have to choose right …

may be your router is damaged so you better contact the vendor of router.

i want to generate A0001 as user id in php. i tried a lot for this but i can't did that so anybody here to help me.........

try to search default bios password in websites otherwise you should have to contact the person for password .

may be you are suffering from overheating problem. so please put some heat sink paste in CPU and try again. if again it shutdown automatically then it must be motherboard or power supply...... hope this is good suggestion for you..............

if you know about star topology then..... i think it's quiet best and suitable for school network with WAN. or if you don't know about the topologies of network then please visit [url]www.wikipedia.org[/url]. hope you reply.

If you want to install Linux in your PC then unpartition some space for that then boot it using Linux installation CD and install but if your Linux didn't found your hard disk then use this command at the time of installation. linux pci=nommconf all-generic-ide

use gpedit.. go to c:\windows\system32 and go to gpedit and click it then it will open group policy and go to user configuration -> administrative components -> start menu and taskbar. then in right hand side search "remove run menu from start menu" double click this and enable first then …

go to my network place's properties and there you see the local area connection and right click and go to status then click support there you see assigned by DHCP or ststic .

if CPU uses is 100% then your computer is suffering from viruses and spy wares so scan it using anti virus with update. i hope it works.

i think OS re installation is the best solution for this.

you can install it in same drive. when you are installing win200 you have to choose drive first then you have to use option with (no change) then it install without formatting your hard drive.

dir /a:h for hidden files . if you want to create boot.ini file then here is the format [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect type this and save as boot.ini and copy it into c: drive and hide it.

try windows 98 bootable CD, if you want to use fdisk and format the drive. For that use command as follows: 1. fdisk (if you want to create and remove partition) 2. format <drivename>: (to format the drive)

here is a site for online scanning go for it. [url]http://www.neuber.com/taskmanager/process/lsass.exe.html[/url] or [url]http://www.liutilities.com/products/wintaskspro/processlibrary/lsass/[/url]

i think windows repair is the best option for this. boot your computer bootable CD of windows and repair.

if your internet explorer is not working properly then go for Firefox and chrome. both are good for browsing...

don't use more than one anti virus at a time in laptop/desktop, it may hang your laptop/desktop. if you want to use different anti virus then remove the previous anti virus and install the other one. here if you have more than one anti virus then remove it and if …

you don't need xp..... just you have to clean install in your hard drive. format the drive using "drive option" at the time of installing vista business.

i think avira antivirus is the best solution for vista. it supports both 32 bit and 64 bit operating system.

first you need to know the series and the manufacture's name of the motherboard, then search in Google for the driver. eg: MSI, ASUS, Intel, Gigabyte..... etc and it's series

here is the link for cursors. [url]http://download.cnet.com/Techline-Cursor-Pack/3000-2317_4-10062532.html[/url]

use windows bootable cd nad run chkdsk. if you found that the problem is in operating system then repair windows with that cd.