No one has voted on any posts yet. Votes from other community members are used to determine a member's reputation amongst their peers.
7 Posted Topics
Worst case: If the machine will not boot, it does not mean that the data files are ruined. You can take the hard drive out of the laptop and put it in an external USB enclosure and should be able to copy off your photos and other files to some …
Usually there is a pattern to the beeps. They represent a code indicating the nature of the problem (e.g. 1,3.2,4 beeps; 2,1,3,4, etc.). Look up the beep codes in your user manual for the machine. Look at the manufacturer's website for your machine and get the manual or their beep …
Can you boot into Safe Mode? If Safe Mode works, try installing the Windows Standard VGA driver. Have you checked the CMOS? If the CPU Fan stops what makes you think the machine is not off?
This is a custom machine that had been working for years for my friend. He said it froze and he unplugged and replugged it into the wall outlet a few times. After that he called me. The machine has no PCI, Video or any other cards in it. Just the …
I wrestled with the heat sink/fan on my Intel D915GAG Socket 775 Motherboard. I found I had to press quite hard to get the prongs through the MB and then press the center pin to seat the prongs. It took a lot more force than I expected but they finally …
[QUOTE=jakeyboy1989;1131276]Hi, I purchased two Acer 1410's. One is working fine but the other has developed a startup/boot issue and I know fear it is dead.. Worked fine for 4 days and then all of a sudden we go to turn it on and get a blank screen. iv taken out …
My daughter's Fujitsu N3010 was overheating so I took it apart and cleaned the heat sink/fan assembly and all the old silver paste. I then applied a new coat of Artec Silver paste and it now runs at about 52-55 Degrees Celcius. I would highly recommend you check the heat …
The End.