chris5126

WPD stands for Windows Portable Device. It's the driver that allows you to treat your CF and MS cards and USB sticks as a devices for Media Syncing. It is also required for ReadyBoost to work. You could disable the device but you probably wanna use it. It sounds like …

[QUOTE=minimoongirl;435246]my pc won't start up the windows failed to start successfully screen comes up with the options i've tried all options including safe mode and last known good configuration and it does start up it goes right back to the windows failed to start screen what am i supposed to …

any thoughts on solairs?? just thought I would open the debate to unix!! ps i love vista think its a good o/s for everyday users and i love linux/unix too but you need to have a lot more knowledge then most everyday users have to make it work the way …

It might be to do with your lease this is just a stab in the dark but have heard of this problem before and this resolved it, same symptons.

hi, Have you checked that the card is firmly in place try removing it from the motherboard then reseating it. Then go to device manager and see if it shows up. It might be that the card has died though in which case you will need to buy a new …

me to with a maxtor (now segate) your one isnt a maxtor or segate is it qrais? I have sent mine back to segate and the replacement has been dispatched but this is my third one! Mine would show up in my computer under the manage function but would not …

Just a quick note to all make sure you use the manufactures drivers not microsoft as they are written specifically for your sound card where as microsoft drivers are often written for a range of similar products so unistall the current drivers download one from your manufactures page and then …

yes vista and office will work dont think outlook will even in compatability mode but im not 100% sure.

how old is it and have you tried it on another pc or fiddled about with the settings. If the answer is more than 3 years and yes but with no luck then bin it its prob dead!

why have you posted this twice i have give you probably the only answer to the question which is you need to hack the files using a program like forensic tool kit (ftk) or another similar program that will be the only way as you have no way of recovering …

what about your dvd drive your computer seems quick enough it unlikely to be the software could be a hardware conflict or fault you got any errors (? or !) in device manager. If not update your cd/dvd driver and firmware from the manufacures not microsofts website and it should …

Hi, I have a machine with X-Fi Titanium sound card. Im getting the following errors when trying to compile the driver. [code] make make -C /lib/modules/2.6.9-89.0.23.ELsmp/build M=/root/XFiDrv_Linux_Public_US_1.00 make[1]: Entering directory `/usr/src/kernels/2.6.9-89.0.23.EL-smp- x86_64' CC [M] /root/XFiDrv_Linux_Public_US_1.00/xfi.o In file included from /root/XFiDrv_Linux_Public_US_1.00/xfi.c:17: /root/XFiDrv_Linux_Public_US_1.00/ctatc.h:22:34: linux/spinlock_types.h: No such file or directory make[2]: *** [/root/XFiDrv_Linux_Public_US_1.00/xfi.o] …

Hi, I have a machine with X-Fi Titanium sound card. Im getting the following errors when trying to compile the driver. [CODE] make make -C /lib/modules/2.6.9-89.0.23.ELsmp/build M=/root/XFiDrv_Linux_Public_US_1.00 make[1]: Entering directory `/usr/src/kernels/2.6.9-89.0.23.EL-smp- x86_64' CC [M] /root/XFiDrv_Linux_Public_US_1.00/xfi.o In file included from /root/XFiDrv_Linux_Public_US_1.00/xfi.c:17: /root/XFiDrv_Linux_Public_US_1.00/ctatc.h:22:34: linux/spinlock_types.h: No such file or directory make[2]: *** [/root/XFiDrv_Linux_Public_US_1.00/xfi.o] …

Dont know if these have been posted but: Super grub will sort out nearly all boot problems for nearly all o/s including vista!: [url]http://supergrub.forjamari.linex.org/?section=download[/url] Windows pe boot disk for helping to recover data without swaping hardware to usb caddies and to change or edit files on your current file system …

this happnes more often than you think as microsoft wrote crap software. Have you tried doing it from the vista cd, if you put it in then go past the first screen, there is an option for repair click on it and try restoring the system from there. If that …

either reformat or ring dell and they will either send someone out or tell u it if you need to get files off use a peboot disk and copy the files to a seperate partition or an external hdd.

is the desktop linked through a patch cable or through wireless if its cable then connect the laptop to the patch cable and see if the network works then. If it does then its a setting problem. Can vista see the wireless network but just not connect or does it …

right sounds to me like a codec problem download gspot (nothing to do with porn) [url]www.headbands.com/gspot[/url] It will enable you to open the file and will then check to see if your comp has the correct codec installed. But i would strongly recomend that you download a codec package google …

windows might have recently updated the driver and it might have changed the settings. right click on your desktop click personlise then display settings try changing the resolutions and the refresh rate to 60hz if that doesnt work download the driver of your graphics card from your manufactures website and …

hello i think i might be able to solve ur problem. I assume you have already done the right click on the conection to the internet and select sharing and select share this internet connection with your local connection (select the one the xbox is plugged into) and then click …

HI guys, I have the following code which redirects all standard input and error to the screen and to a log file, I would like to change it so it only redirects standard out and all standard error goes just to the log file can anyone help: [code] #capture all …

Hi, Trying to add a swap file to my server as below: [code] dd if=/dev/zero of=/swapfile1 bs=1M count=2048 2048+0 records in 2048+0 records out 2147483648 bytes (2.1 GB) copied, 27.4514 seconds, 78.2 MB/s [root@clearab2 /]# mkswap -c /swapfile1 Setting up swapspace version 1, size = 2147479 kB [root@clearab2 /]# swapon …

try updating the drivers and firmware is always the best place to start!

Hi guys, I have a shell script which is to run on multiple OS, I have the following two variables declared: [code] NPAID_CMD="ps -A -o pid,comm | grep NParchiveSM | awk -F \" " '{print $1}'\" SHMMAX="echo "Not impletemted on $OS"" [/code] On Linux the above decelerations are fine and …

sun servers or dell servers are pretty cheap but you do you need straight line speed or do you want multiplue process runing at once? for example if your running a database behind the website with multiple request from users then straight line speed isnt needed and a mutli core …

Hi, Can someone please help me install openssl-devel on suse, I have used the following command: yast2 -i openssl-devel But dont have physical access to the server to insert the cd and there are no repos configured. Try to configure a repo and I get an error is there an …

you could download and use cygwin then you will have the bash command installed and then ./myapp `ls -l` would work nicely

if you had a list of the web sites in a file you could use a for loop read each line and perform a command: [code] SITELIST=/path/to/file SNAPSHOTDIR=/tmp for i in $SITELIST do #command e.g. echo "Taking snapshot of $i" wget -r -l1 -N -k -x $i > ${SNAPSHOTDIR}/$i done …

right heres a few simple steps: First open you bit torrent client and go to options and look to see what port it is listening on it will be a random port. Make a note of this for later. Then go to start and in the search at the bottom …

Hi Guys, I have a file with lots of similar records example shown at end, I want to be able to delete one of the records and have the following line of code which finds the record I need to delete, my question is now I have found the record …

HI Guys, Prob a very simple one but im stumped, I run the following command and get: [code] date Wednesday, 19 August 2009 09:20:59 BST [/code] But when I run [code] date -u '+%y%m%d.%H:%M:%S' 090819.08:21:27 [/code] My question is why is the second command an hour behind? In my environment …

hi guys, when my comp was last in vista it said that it needed to run windows memory diagnostic when it next restarted so i schedulled it. Now it runs the test finds no problems but will just keep restarting the test everytime it is done. I have tried to …

Hi, I have a site and I want the user to be able to select the refresh time. I set it on page load: [code] void Page_Load(Object sender, EventArgs e) { Response.AppendHeader("Refresh", "10"); } [/code] Then the user can change it via a drop down list. In the list changed …

Hi, I have created a web application that uses impersonation in the web config file to run as an administrator user under vista. I need this so the program can have access to a remote network drive, however the application cannot see the drive. Im using the unc address e.g …

Hi, I wish to add the following to my web.config file: [code] <appSettings> <add key="networkDrive" value="C:\test"/> </appSettings> [/code] But everytime I add it i get the following error: [code] Sections must only appear once per config file [/code] I looked in the file to see if it appeared more than …

Hi, Im creating a website that will be used to monitor servers, the user can add and remove servers and the servers list will be constantly chaning. I need to create a generic page to display the monitoring results that will adapt depending on which server the user selects. The …

HI, I am creating a website but when i right click on my login.aspx and click set as start page it seems to be ignored. I rebuild the website and click view in browser and it just takes me to [url]http://localhost:62665/website/[/url] I am using master pages if that helps anyone …

Hi, I am creating a aspx site that will act as a monitoring program the user has the option of adding or removing servers. However when they do this a windows service needs to be restarted. Therefore my question is: Can the website restart the service? Or can it view …

hi this is prob a very simple question. I have a website that that is acting as a monitoring program. On the homepage i need to display Currently monitoring $$ servers Where $$ is a select count statement from a SQL server db. My question is how do I do …

hi, i am totally stuck i need a script (that works in ksh under solaris 10) that takes the following output [code] d15 509MB c1t0d0s5 d13 7.0GB c1t0d0s3 d11 1.5GB c1t0d0s1 d10 10GB c1t0d0s0 d25 509MB c1t1d0s5 d23 7.0GB c1t1d0s3 d21 1.5GB c1t1d0s1 d20 10GB c1t1d0s0 [/code] and for the …

Hi I have a command that produces the following: [code] /usr/ucb/ps -auxxx|awk '{print $3,$4,$2,$1,$11}'|grep -v 0.0 %CPU %MEM PID USER COMMAND 0.2 5.217405286920 1910 noaccess 0.1 0.1 180 root 0:43 0.1 0.1 686 root 0:41 0.1 0.1 26198 chris /usr/lib/ssh/sshd 0.1 0.1 26767 root /usr/ucb/ps 0.1 0.1 26215 root bash …

Hi Guys, I have a file which contains the following info (it realtes to CPU usage): [code] 1 0 2 2 0 10 1 11 [/code] It is stored in a text file. I need to read each line in turn into an array and then import it into a …

Hi guys, Im trying to create a console app that will read from a text file and import the file into a sql database. I have completed the following already: Read from a text file and put out to console Read from sql database and put out to console Now …

Hi guys, I have a program im writing that needs to look for a file in a certain directory then when it find the file add the contents to a database. I have the program working which does this however the filename changes depending on when it was created. The …

Hi guys, Very new to sql and my question is prob very basic. I have a table desing shown below. I will using a c# program to add new rows to the database but i only want to add a new row if the hostname doesnt currently exist in the …

Hi, I am writing a script to get information on disks for Solaris 10, does anyone know of a way to print out the size of each disk on the system in MB i know how to get it in GB and could do some number manipulation however it would …

HI guys, I have file with 6 values in: [code] 1060276 2211546 7544.941158316 1060276 2211606 7545.960677177 [/code] I put those numbers into variables: [code] obyte1=`cat $TMP | sed -n 1p` rbyte1=`cat $TMP | sed -n 2p` snapt1=`cat $TMP | sed -n 3p` obyte2=`cat $TMP | sed -n 4p` rbyte2=`cat $TMP …

you can do this a number of ways. SMLT (split multi link trunking) IPMP (IP multi pathing) etc etc but first you should tell us what software and hardware your using as some o/s e.g sun support IPMP in software and most routers will support (SMLT) in hardware or you …

go to start control pannel and then autoplay make sure these settings are correct you might have changed them or if you have programs like deamon tools or nero installed they will change them for u during the install for example deamon tools disables cd/dvd autorun

hi guys, Getting some wierd networking issues between two of our sun boxes I will first explain the set up. Box one: running solaris 10 with one physical network connection into a switch Box two: running solaris 8 with three pyhsical network connections two into the same switch as above …